Reflective Chevron Tape Manufacturers and Suppliers

You are most concerned about the problem

1. Q:Are you a manufacturer or trading company?
A: Our company is a manufacture of specializing in processing and marketing kinds of reflective materials with own factory.
2. Q: Do you offer a free sample?
A: Of course, we can offer a small free sample for you.
3. Q: What is the delivery time?
A: Usually 5-15 working days, According to the order quantity.
4. Q: What are the payment terms?
A: We can accept T/T, L/C, Western Union, Paypal, etc.
5. Q: What’s your MOQ?
A: We can accept small order first to check the quality.

6.Q: Do you have DOT C2/ CE certification?
A: Yes, DOT-C2/ ECE 104 certificated having been approved

WEALLIGHT Prestriped Reflective Chevron Striping

We carry high-quality self-adhesive, flexible, peel, and stick reflective chevron, Battenburg, and block style panels.

Our “ONE PIECE” Horizontal Reflective NFPA Chevron Panels (6″ wide stripes) are longer than they are tall and have stripes that slant downward in both directions. We carry 4″, 6″, 8″, and 12″ wide horizontal panels in lengths from 3 to 7 feet.

A more affordable option would be our “TWO PIECE” Reflective Chevron Panel Kits” (6″ wide stripes) which consist of equal amounts of right and left-hand slant material. We carry Lime/Red, Orange/White, and Red/White.

We offer Pre-Striped Reflective Chevron Panels “BY THE FOOT” in rolls. We also have the Pre-Striped rolls in “30 FOOT” and “150 FOOT”lengths. We have both left slant and right slant available in 1″, 2″, 3″, 4″, 6″, 8″, 12″ , 15″ , 18″, 24″ and 30” widths. We also carry Nikkalite High Intensity Prismatic Orange/White or Red/White Pre-Striped Chevron Material By The Foot. For “Roll Up Doors” we carry pre-striped Chevron Slat Strips.

Our Checkered Reflective Tape (Sold By The Foot) gives you excellent visibility and allows you to differentiate your vehicle or fleet from other types of vehicles. Battenburg panels are very popular in Europe and are highly visible as well as conspicuous.

Our “SHADOW (Ghost) Reflective Chevrons” blend in with the vehicle in the daytime and reflect bright white at night.

“Motor Cycle Chevron Panels” are great for marking motorcycles and can also be used for UTV’s. These kits are especially popular for BMW Motorcycles.

Our “ATT Style Non-Slanting Panels” are reflective panels that alternate colors but without the slant. (picture at bottom of this page) Many customers use these on the rear or tailgate of their vehicle because they are less expensive and they look different from slanting panels. We fleets, we carry BLOCK (AT&T Style) Reflective Panels By The Foot as well. These panels alternate from either lime and red or lime and orange. 12″ of each color.

We carry “Solid” Colored Reflective Chevron Striping Tape in Fluorescent Lime/Yellow, Red, Fluorescent Orange, School Bus Yellow, White, and Blue. Striping tape rolls are used in situations where a panel is not practical or for an area that is larger than what a panel will cover. Purchasing our Starter Triangles along with our 6″ rolls of chevron striping makes creating chevrons much easier and exact. Striping with rolls of reflective tape is less expensive than using panels and takes a little extra install time. Our Reflective Chevron COMBO KITS combines two rolls of reflective material at a discount.

Lastly, we carry “Do it Yourself” Chevron Kits.” These kits are an alternative to our premade reflective panels. You basically purchase the material we use to make the panels and do them on site. Kits consist of a reflective base material and a 6″ red overlay to create the red stripes. The resulting chevrons are an exact match for our panels.

1. Pre-Fabricated Chevron Kits

Sheets of 6-inch reflective sheeting can be pre-assembled and even trimmed to exact size or in sheets that you trim. This saves installation time and waste because your installer installs one piece just like “wallpaper”. The other advantage over printed panels is that any damaged stripe can be replaced.

2. Printed Chevron Panels

High-intensity grade panels up to 48 inches wide can have the “red” or another color digitally printed over the base white, or yellow or fluorescent lime green. These are easy to prepare since you trim as required and are very easy to install. The disadvantage is that the replacement of a “damaged” section requires the removal and replacement of the panel involved. Custom sizes can be produced.

3. Prefabricated Chevron Kits For Bumper

Bumpers kits can be prefabricated and “hot-cut” (sealed).

4. Prefabricated Pre-Cut Chevron Kits For Pickup Tailgates

All common models of pickups used by Emergency services can be pre-printed and pre-cut for perfect installation using the new prismatic technology. Compound bends are avoided. Simply apply the sections. You must specify if decal emblems are to be removed and repositioned over the chevron or not to be removed. If not removed, the chevron will be pre-cut around the emblems. Installation can be done in minutes instead of hours.

Reflective Chevron Tape Related Reading

Reflective Tape For Trailers installation example and requirements. In all the major traffic accidents, large cars, including trucks and buses, related accidents occupy the main position.

Retro Reflective Tape Manufacturers (Applications): Retro-reflective tape, also known as Reflective tape, it is with the emergence of vehicles, in order to solve the traffic accident, and was developed out of a new type of material. WEALLIGHT is a Reflective Tape Manufacturer, we are committed to the cause of traffic safety and hope that more people can travel safely.

Reflective Material Factory — WEALLIGHT

WEALLIGHT is a retroreflective material manufacturer, specializing in the processing and sale of various reflective materials with its own factory. We have a strong R & D capability, the product not only solves the traffic safety problem but also widely used in shoes, clothing, bags, and other fashion areas.