Engineer Grade Reflective Sheeting Vinyl Supplier Manufacturer

Product Description of Engineer Grade Reflective Sheeting EG Vinyl

Safety protective equipment within the reflective material can cause a strong reflective effect under certain light irradiation to provide the most effective and reliable security for the pedestrian in the dark or night operation personnel. WL-3190 is a PVC surface engineer grade reflective sheeting film, it’s digital printable and screen printable, and also available for plotter cutting. WL-3190 has standard colors such as white, red, orange, yellow, green, blue, brown, black, etc.

Durable enclosed lens reflective sheeting with pressure-sensitive adhesive backing for application to standard traffic sign substrates by hand or in an Interstate squeeze roller applicator. Meets ASTM D 4956 Spec Type I, Class 1. 1-3 year durability.

Engineer grade reflective sheeting is flexible and cuttable, very easy to process, please test it before your application. It’s widely used in ordinary road signs, advertisement signs.

Handle with caution to avoid damage to its surface the engineer grade reflective vinyl is delivered inside a cardboard box free of dust, moisture, and the vinyl is held by two bases, which do not allow folding or abuse the roll by the edges when handling or stowing it the roll, in turn, is covered by a common plastic layer to increase their protection has the rules for traffic signs, required by the SCT is not recommended to apply on unpainted stainless steel always test on the specific substrate before application wet method of application is not recommended for this vinyl.

Feature Of Engineer Grade Reflective Vinyl

The sheeting may be hand cut, band sawed, guillotined, cold or hot die cut, and electronically cut. Application Temperature: 65F (18C) minimum (sheeting and substrate).

• Warranted outdoor durability of 1-3 years outlasts the competition and increases your customer’s satisfaction.
• Excellent reflectivity even when totally wet. Ideal for wet or dry weather conditions day and night.
• Obtain maximum impact for entrance signage as WL-3130 retains reflectivity when viewed at wide entrance angles.
• Apply to typical industrial substrates and flat surfaces only (not for vehicle application).
• Resists mild acids, alkalis, salt, and water.
• Available by-the-yard in popular widths.
• Enclosed lens retroreflective sheeting with glass bead retroreflector
• Designed for production of non-critical traffic signs and pressure-sensitive stickers
• Pressure-sensitive adhesive backing with liner
• Meets ASTM D4956 Type I

Application Of EG Reflective Sheeting

• For application to aluminum or plywood
• Intended for production of non-critical traffic signs and pressure-sensitive stickers
• Industrial signage
• Entrance signs
• Directional signs
• Warning / Traffic signs

Fabrication

Letters and characters should be a minimum height of 3 inches with a minimum stroke width of 3/8 inch.

Cutting

The sheeting may be hand-cut, band sawed, guillotined, cold or hot die-cut, and electronically cut.

Electronic Cutting Machines:

Users are encouraged to evaluate cutting procedures for their own equipment and shop conditions. However, these general recommendations should be followed to
ensure easy handling.

• 1. There should be enough downforce on the knife blade to slightly score the liner. Too little downforce will not completely cut through the sheeting and adhesive. Too much downforce will cut through the liner, dull the blade and serrate the cut edge.
• 2. The knife blade should be sharp and clean. If there is adhesive on the blade, wipe it off with mineral spirits or isopropyl alcohol.
• 3. Sheeting temperature should be at least 65˚F (18˚C) or higher. If the sheeting temperature is less than 65˚F (18˚C), allow it to condition at 65˚F – 75˚F (18˚C – 24˚C) for at least 24 hours.

Weeding – Weed (remove) the excess sheeting as soon as possible after cutting. After more than 24 hours, the adhesive may flow into the cut areas and make weeding more difficult.

Retro Reflective Sheeting Supplier and Manufacturer – WEALLIGHT

WEALLIGHT is a Reflective Sheeting Supplier and manufacturer, wholesale many kinds of retroreflective vinyl rolls, and accepts custom orders.

Our main products are High Intensity Prismatic Reflective Sheeting, EGP Reflective Tape, Reflective Road Signs Materials, Prismatic Reflective Tape, EGP Reflective Vinyl, Digital Print Reflective Vinyl, Engineer Grade Prismatic Reflective Sheeting, Outdoor Reflective Tape, High-Intensity Grade Reflective Sheeting, Micro Prismatic Reflective Sheeting, Reflective Outdoor Vinyl, Custom Reflective Helmet Decals, Engineering Grade Reflective Sheeting, Reflective Tape For Signs, Commercial Grade Reflective Sheeting, Reflective Labels Printed, Red Reflective Sheet, Reflective Bumper Stickers For Cars, Diamond Reflective Sheeting, Reflective Tape For Trucks, Custom Reflective Aluminum Signs, Reflective Tape SASO 2913, and so on.

We also Accept Custom Reflective Signs. Now, contact us to know more details.

Contact us to get a free sample of Engineer Grade Reflective Sheeting, Today!